Professional Connector Manufacturer

A connector is a coupling device that connects electrical terminals to form a circuit. Connectors are used in many parts of life, such as automobiles, computers and other electronic devices are the necessary choice of connectors.

Connections between wires, cables, printed circuit boards and electronic components can be realized by means of connectors. In TE Connectivity (TE), we design and manufacture a variety of connector product combinations that can reliably transmit data, power and signals in the most harsh environments and extreme use situations. Our connectors can achieve higher performance while reducing application size and power consumption. Our audio and video connectors provide enhanced circuit board retention and EMI shielding capabilities. Our car connectors can withstand harsh road and off-road transport conditions.

Our edge connectors and sockets support current generation SDRAM and DDR memory, new DDR2, DDR3 and DDR4, and FBDIMM generation modules. Our LUMAWISE LED pedestal provides button-in LED retaining function and no welding is required; it uses plug-in wires to connect solid wires, fused wires and strands without tools. In our connector portfolio, we provide powerful solutions to improve the connectivity of critical systems.

Many people think that there are too many kinds of electronic connectors and the manufacturing process should be different. In fact, the manufacturing process of connectors is basically the same, which can be divided into stamping (connectors are used in many parts of life, such as automobiles, computers and other electronic devices are the necessary choice of connectors. Many people think that there are too many kinds of electronic connectors and the manufacturing process should be different. In fact, the manufacturing process of connectors is basically the same, which can be divided into four manufacturing processes: Stamping, Plating, Molding and Assembly. Following is a brief description of the four manufacturing processes of the following connector by Pandi Electronics Technology:

Stamping stamping is a process of stamping electronic connectors (pins) with thin metal strips by means of large high-speed stamping machines. One end of the large roll of metal belt is fed into the front end of the punch, the other end is wrapped into the pulley through the hydraulic table of the punch, and the metal belt is pulled out by the pulley and the finished product terminal is rolled out.

Plating connector pins should be sent to plating stage after stamping. In the electroplating stage, the electronic contact surface of the connector will be coated with various metal coatings, nickel plating, tin plating and semi-gold plating to prevent oxidation and enhance conductivity. In the process of feeding stamped pins into plating equipment, distortion, fragmentation or deformation will also occur. These quality defects can be easily detected by the above technology.

Molding refers to the injection of molten plastic into the metal membrane of the plastic box seat of the electronic connector, which is then made by rapid cooling. Attention should also be paid to the detection of "leakage quot" when the melted plastic is not fully filled with the membranes; (Short Shots), which is a typical defect to be detected in the injection stage. Other defects include filling or partial blockage of sockets (these sockets must be kept clean and unobstructed so that they can be correctly connected to the pin at final assembly).

The final stage of assembly electronic connector manufacturing is finished product assembly. There are two ways to assemble electroplated pins and injection box sockets: one is to insert one pin at a time, the other is to insert multiple pins at the same time with the box socket. No matter which insertion method is adopted to assemble, it is necessary to ensure that all insertion pins can not be missing and positioned correctly. In the manufacturing process of connectors, besides ensuring the quality of products, we should also pay attention to safety. Connector manufacturer is an electronic component manufacturer which integrates R&D, production and sales. For more than ten years, it mainly provides high-quality connectors for mobile phone computers, frequency converters, smart toilets, sweepers, charging piles, printers, inverters, smart door locks, smart home, medical electronics, new energy vehicles and other enterprises. Products. Connector products are supplied: row pin connector, row mother connector, Jane connector, horn connector, D-SUB connector, RJ45 connector, FPC connector, USB connector, automobile connector, etc. More than 20,000 products have been subdivided to meet the needs of various high-end customers.